Konfigurasi VLAN dan 2 Router di Cisco packet tracer

Langkah-langkah :

1. berikan IP static masing masing pada komputer seperti gambar di atas (baca juga :cara berikan ip static komputer dengan cisco packet tracer)

2. berikan IP pada server dan buatlah DNS cara buat dns server di packet tracer

3. setting switch masing masing :

1. SWITCH 0

Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 30
Switch(config-vlan)#name pakeko
Switch(config-vlan)#exit
Switch(config)#vlan 40
Switch(config-vlan)#name masheru
Switch(config-vlan)#exit
Switch(config)#int fa0/1
Switch(config-if)#aw
Switch(config-if)#sw
Switch(config-if)#switchport mo
Switch(config-if)#switchport mode acc
Switch(config-if)#switchport mode access
Switch(config-if)#sw
Switch(config-if)#switchport acc
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#int fa0/2
Switch(config-if)#sw
Switch(config-if)#switchport mo
Switch(config-if)#switchport mode acc
Switch(config-if)#switchport mode access
Switch(config-if)#sw
Switch(config-if)#switchport acc
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#int fa0/3
Switch(config-if)#sw
Switch(config-if)#switchport mo
Switch(config-if)#switchport mode acc
Switch(config-if)#switchport mode access
Switch(config-if)#sw
Switch(config-if)#switchport acc
Switch(config-if)#switchport access vlan 40
Switch(config-if)#exit
Switch(config)#int fa0/4
Switch(config-if)#sw
Switch(config-if)#switchport mo
Switch(config-if)#switchport mode acc
Switch(config-if)#switchport mode access
Switch(config-if)#sw
Switch(config-if)#switchport acc
Switch(config-if)#switchport access vlan 40
Switch(config-if)#exit
Switch(config)#
Switch con0 is now available
Press RETURN to get started.
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int fa0/5
Switch(config-if)#sw
Switch(config-if)#switchport mo
Switch(config-if)#switchport mode tr
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#
Switch con0 is now available
Press RETURN to get started.
%LINK-5-CHANGED: Interface FastEthernet0/5, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to up

%LINK-5-CHANGED: Interface FastEthernet0/5, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to down

%LINK-5-CHANGED: Interface FastEthernet0/5, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to up


Switch>en
Switch#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int f0/5
Switch(config-if)#w
Switch(config-if)#sw
Switch(config-if)#switchport mo
Switch(config-if)#switchport mode t
Switch(config-if)#switchport mode trunk
Switch(config-if)#ex
Switch(config)#do sh vlan

VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/10, Fa0/11, Fa0/12, Fa0/13
Fa0/14, Fa0/15, Fa0/16, Fa0/17
Fa0/18, Fa0/19, Fa0/20, Fa0/21
Fa0/22, Fa0/23, Fa0/24, Gig0/1
Gig0/2
30 pakeko active Fa0/1, Fa0/2
40 masheru active Fa0/3, Fa0/4
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
30 enet 100030 1500 - - - - - 0 0
40 enet 100040 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
--More--
Switch con0 is now available
Press RETURN to get started.

Switch 1

Switch>en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#vlan 10

Switch(config-vlan)#name DEWI

Switch(config-vlan)#exit

Switch(config)#vlan 20

Switch(config-vlan)#name AZIZAH

Switch(config-vlan)#exit

Switch(config)#int fa 0/1

Switch(config-if)#sw mode acc

Switch(config-if)#sw acc vlan 10

Switch(config-if)#exit

Switch(config)#int fa 0/2

Switch(config-if)#sw mode acc

Switch(config-if)#sw acc vlan 10

Switch(config-if)#exit

Switch(config)#int fa 0/3

Switch(config-if)#sw mode acc

Switch(config-if)#sw acc vlan 20

Switch(config-if)#exit

Switch(config)#int fa 0/4

Switch(config-if)#sw mode acc

Switch(config-if)#sw acc vlan 20

Switch(config-if)#exit

Switch(config)#

Press RETURN to get started.

Switch>en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#int fa 0/5

Switch(config-if)#sw mo tr

Switch 3

Switch>en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#int fa0/3

Switch(config-if)#sw mo tr

Switch(config-if)#ex

Switch(config)#ex

Switch#

%SYS-5-CONFIG_I: Configured from console by console

Switch#en

Switch#vl

Switch#vlan datab

Switch#vlan database

% Warning: It is recommended to configure VLAN from config mode,

as VLAN database mode is being deprecated. Please consult user

documentation for configuring VTP/VLAN in config mode.

Switch(vlan)#vl

Switch(vlan)#vlan 10 name DEWI

VLAN 10 added:

Name: DEWI

Switch(vlan)#ex

APPLY completed.

Exiting....

Switch#vl

Switch#vlan dat

Switch#vlan database

% Warning: It is recommended to configure VLAN from config mode,

as VLAN database mode is being deprecated. Please consult user

documentation for configuring VTP/VLAN in config mode.

Switch(vlan)#vl

Switch(vlan)#vlan 20 name AZIZAH

VLAN 20 added:

Name: AZIZAH

Switch(vlan)#ex

Router 0

Press RETURN to get started!

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int fa 0/0

Router(config-if)#ip add 192.168.10.10 255.255.255.0

Router(config-if)#no shut

Router(config-if)#ex

Router(config)#int fa 0/1

Router(config-if)#ip add 192.168.5.5 255.255.255.128

Router(config-if)#no shut

Router(config-if)#ex

Router(config)#int fa 0/0.30

Router(config-subif)#en

Router(config-subif)#encapsulation do

Router(config-subif)#encapsulation dot1Q 30

Router(config-subif)#ip add 192.168.30.33 255.255.255.240

Router(config-subif)#ex

Router(config)#int fa 0/0.40

Router(config-subif)#en

Router(config-subif)#encapsulation do

Router(config-subif)#encapsulation dot1Q 40

Router(config-subif)#ip add 192.168.40.49 255.255.255.240

Router(config-subif)#ex

MEMBERIKAN IP ROUTE 0

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#ip route 192.168.70.64 255.255.255.192 192.168.5.6

Router(config)#ip route 192.168.10.32 255.255.255.224 192.168.5.6

Router(config)#ip route 192.168.20.64 255.255.255.224 192.168.5.6

Router 2

Press RETURN to get started!

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int fa 0/1

Router(config-if)#ip add 192.168.5.6 255.255.255.128

Router(config-if)#no shut

Router(config-if)#ex

Router(config)#int fa 0/0

Router(config-if)#ip add 192.168.70.65 255.255.255.192

Router(config-if)#no shut

Router(config-if)#ex

Router(config)#int fa 0/1.10

Router(config-subif)#en

Router(config-subif)#encapsulation do

Router(config-subif)#encapsulation dot1Q 10

Router(config-subif)#ip add 192.168.10.33 255.255.255.224

Router(config-subif)#ex

Router(config)#int fa0/1.20

Router(config-subif)#en

Router(config-subif)#encapsulation do

Router(config-subif)#encapsulation dot1Q 20

Router(config-subif)#ip add 192.168.20.65 255.255.255.224

Router(config-subif)#ex

Press RETURN to get started.

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.5.5

Router(config)#ip route 192.168.30.32 255.255.255.240 192.168.5.5

Router(config)#ip route 192.168.40.48 255.255.255.240 192.168.5.5

    

   => COBA PING

  => dan akses DNS